MagMod MagSphere 2 Review
The MagMod MagSphere 2 is a compact silicone diffuser for photographers who want to soften and spread speedlight output without carrying a large modifier. Its magnetic attachment makes it easy to combine with the wider MagMod system, while the flexible body packs down in a camera bag. Choose it when broad, gentle fill is useful, and budget for the required MagGrip if your flash does not already have one.
The MagMod MagSphere 2 is a compact silicone diffuser for photographers who want to soften and spread speedlight output without carrying a large modifier. Its magnetic attachment makes it easy to combine with the wider MagMod system, while the flexible body packs down in a camera bag. Choose it when broad, gentle fill is useful, and budget for the required MagGrip if your flash does not already have one.
$59.95 listed · Save $2.99
5% off
TESTEDMagSphere 2, white · US
Sample cart checked 2026-10-22. Before tax and shipping. Check the current checkout total before paying.
Affiliate link. We may earn a commission at no extra cost to you. Details
Speedlight photographers who want a portable, quick-to-attach diffuser for broader direct or bounced light, with room to add MagMod modifiers later.
You want a grid or tightly controlled beam, do not own or want to add a MagGrip, or need a large softbox as your main light source.
A speedlight is easy to carry, but its small bare flash head can produce a hard, direct look. The MagMod MagSphere 2 is a compact way to spread that light into a broader source. Its flexible silicone body is light to pack, and its magnetic attachment fits into a system that can add grids and gels as a shoot demands. For event, portrait and location photographers who use speedlights, it is a useful diffusion tool when broad fill matters more than a tightly controlled beam.
For a simple starting setup, our lighting guide explains key, fill and light-source size. Our white balance guide also helps when you mix flash with room lighting.
A diffuser for direct or bounced flash
MagMod describes the MagSphere 2 as an omnidirectional diffuser. You can aim it toward a subject for a broader direct source, or use it to bounce flash from a nearby ceiling or wall. Its design aims to spread light beyond the small bare flash head, with the final result depending on subject distance and nearby bounce surfaces.
Our video lighting basics guide explains how source size and distance affect softness, a useful principle when deciding whether this small flash modifier or a larger source fits the job.
That broad spread is useful for groups, events and quick portraits where you want to take the edge off direct flash without setting up a stand and softbox. It can also make bounce flash more forgiving when a suitable surface is available. The trade-off is control. If you need a narrow highlight, a clean edge of light or less spill on a background, MagMod’s MagGrid is the more direct tool. The MagSphere and MagGrid can also be stacked when you want diffusion with a narrower beam.
A small accessory that can grow into a system
The MagSphere 2 attaches magnetically to a MagGrip, which stretches over the flash head and provides the system’s base. Once that piece is in place, MagMod modifiers can be switched and combined without relying on straps or adhesive. This is the strongest reason to choose MagSphere if you already own compatible MagMod equipment: it adds a different light shape without asking you to rebuild the entire kit.
If you are starting from scratch, include the MagGrip in your cost comparison. MagSphere 2 is the modifier, not a complete flash mounting kit. The MagGrip is the required adapter, and it is the part that determines the fit on your speedlight. MagMod says the system is designed for round-head and common rectangular flashes, but it has not tested every flash. Check the manufacturer’s fit advice for your exact model before ordering.
MagMod says the version 2 modifier works with the previous MagMod system, while recommending same-generation pieces for the best experience. That makes the MagSphere a reasonable addition for an existing owner, but it is still worth confirming which grip and other modifiers you have. A compatible connection is useful only if it fits the flash you actually use.
Flexible for transport, broad by design
The silicone body can be compressed into a camera bag and springs back into shape, according to MagMod. That flexibility suits photographers who move between locations and want a modifier that does not need a rigid case or careful assembly. The manufacturer also says the MagSphere 2 is 40% lighter than the original MagSphere, a useful consideration if you are replacing an older kit.
The modifier’s wide spread is an advantage for soft fill, but it is not a substitute for every lighting tool. It does not give the same directional control as a grid, and it is smaller than a softbox that creates a large, close source for portraits. Bounced flash still depends on having a usable nearby surface, and direct flash remains direct even when diffused. We recommend the MagSphere for photographers who want a fast, portable change in flash character, not as a one-piece solution for every lighting setup.
When planning a kit, start with the flash you already own and the way you normally light. If the flash is on camera and you often need a quick fill, the MagSphere can stay in the bag as an easy modifier to reach for. If you build a portrait setup around stands, larger sources and deliberate placement, treat it as a complementary speedlight accessory rather than your main light shaper. That distinction keeps the purchase focused on the work it is designed to support.
Buying recommendation
The MagSphere 2 makes the most sense if you already have a compatible MagGrip or want to build around MagMod’s magnetic modifiers. It offers a useful broad-light option in a packable shape, with clear limits when spill control is the priority. The official US price was $59.95 on October 22, 2026. We applied code TESTED to the exact single-item cart and observed $56.96 before tax and shipping. The store rounded the 5% discount to cents. Check the order summary for the current total; the code and partner shop link are in the buying panel above.
What we like
- Omnidirectional diffusion is useful for direct or bounced flash
- Flexible silicone compresses for storage and returns to shape
- Magnetic system allows quick modifier changes and stacking
- Designed for both round-head and common rectangular speedlights
What to know
- Requires a MagGrip adapter and spreads light more broadly than a grid
Key specs
| Product | MagMod MagSphere 2 |
|---|---|
| Type | Omnidirectional speedlight diffuser |
| Material | Flexible silicone rubber |
| Attachment | Magnetic; requires MagGrip |
| Flash compatibility | Round-head and rectangular speedlights; check MagGrip fit |
| SKU | MMSPHERE02 |
Questions
What is the discount code for the MagMod MagSphere 2?
The MagMod discount code is TESTED for 5% off at magnetmod.com. For MagSphere 2, white, the sample-cart price was $56.96 USD with TESTED, before tax and shipping (2026-10-22). Apply to eligible orders at magnetmod.com. Confirm compatibility and the saving shown at checkout.
Who is the MagSphere 2 best for?
Speedlight photographers who want a portable, quick-to-attach diffuser for broader direct or bounced light, with room to add MagMod modifiers later.
Who should skip the MagSphere 2?
You want a grid or tightly controlled beam, do not own or want to add a MagGrip, or need a large softbox as your main light source.
Do I need a MagGrip to use MagSphere 2?
Yes. MagMod identifies MagGrip as the adapter/base for attaching modifiers. Check whether you already own a compatible MagGrip before comparing the cost of a complete setup.
Will MagSphere 2 fit a round-head flash?
MagMod says the current modifiers are designed for round-head as well as common rectangular speedlights. The MagGrip is the fit-critical piece; check the manufacturer's guidance for your exact flash.
How is MagSphere different from a grid?
MagSphere is an omnidirectional diffuser for broader light, including direct or bounced use. A grid narrows the beam and controls spill. MagMod says the modifiers can be stacked when you want diffusion with more direction.
Can I use MagSphere 2 with an original MagGrip?
MagMod says its version 2 products work with the previous system, while recommending same-generation modifiers for the best experience.